GC-2XU00AAC(2P/20A/208-240VAC)专用接触器

GC-2XU00AAC(2P/20A/208-240VAC) Definite Purpose Contactor(Follow Defers To DP Contactor),Mainly Is Suitable For 50Hz Or 60Hz, When The AC-8a Use Category Fixed Working Voltage Is 240V Or 277V The Nominal Current Up To The 20A Electric Circuit, Is Suitable For The Starting And The Control Single-Phase Motor (Or Compressor) And Other Single-Phase Loads.Mainly Uses In The Domestic Electric Appliances Profession, Specially In Air Conditioning Profession,Conforms To IEC60947, UL508 and GB14048standard.

GC-2XU00AAC Is Suitable To Exchanges 50 Or 60hz, Fixed Working Voltage To 277v, Fixed Operating Current To 20A Single-Phase Load Circuit Control,At Present, Widely Applies To The Single-Phase Mechanical Device Main Circuit As Well As The Single-Phase Air-Conditioner Compressor Control.

2、正常使用条件及安装条件
A。在周围空气温度极限值为+65时，得
向下的极限值为-25
b.安装地点海拔不超过2000m
C。空气污染等级为2级
d.安装类别为II；
e.安装面坡度不超过±5°
F。无明显起伏、冲击和振动的场所。

三、主要技术参数
A。 75% ~ 110% 中的接触器线圈可靠地拾取
工作时，20% ~ 70%U 的压降电压
b.接触器用途类别：Ac-1Ac8a
C。接触器在0.4m处，噪音低于40db。

4.安装规格及安装尺寸

A。安装方式为螺钉固定，有两种安装尺寸选择一种尺寸安装面与水平面垂直形状坡度不大于±5°

b.使用前应检查电源端子和接触器
快速连接插入件是否到达、是否可靠、避免创建
故障、检查背后可能会激发尝试。

UL 文件编号： E251539

IE